Quick answer: you need two measurements. The outer size is your frame's size — measure the glass or the backing board, not the outside of the frame. The opening is the size of your print; we cut the window slightly smaller so the edges of the print sit behind the mount. Enter both on our custom picture mount page and we cut the board to fit.
Step 1: the outer size (your frame)
Open the back of the frame and take out the glass or the backing board. Measure its width and height: that is the outer size of your mount. A frame sold as A3 takes an A3 mount. Don't measure the outside of the frame — the moulding adds to that, and a mount cut to it won't go in.
Step 2: the opening (your print)
Measure your print edge to edge and enter that as the opening. We cut the window a little smaller than the number you give us, so the mount overlaps the print slightly and holds it flat. If your print has a signature or a date near the edge, allow a little extra room so the mount doesn't cover it.
Step 3: check the border
Take the opening away from the outer size and halve it: that's the border on each side.
| Frame | Border | |
| 30 × 40 cm | A4 | 45 mm at the sides, 52 mm top and bottom |
| A3 | A4 | 44 mm at the sides, 62 mm top and bottom |
| 50 × 70 cm | 40 × 50 cm | 50 mm at the sides, 100 mm top and bottom |
A border of 4 to 8 cm suits most frames, and larger frames look better with a wider one. Most framers either keep the border the same all round or make the bottom slightly deeper.
Standard size or custom?
Our mounts come in standard sizes from 5 × 7" and A5 up to A1 and 50 × 70 cm, plus squares. If your frame or print isn't one of them — a vintage frame, a panoramic print, an American size — choose Custom Size and enter any outer size from 10 to 120 cm a side, in centimetres or inches.
Choosing the board
Every mount is conservation-grade board with a 45° bevel-cut window, cut to order in our workshop. Choose white or black board, or a premium patterned mount, and you can add printed text or a logo — a name and a date, say. For help picking a colour, see how to choose a mount colour, and for what mount board is and why it matters, our complete guide to mount board.
Putting it together
Lay the mount face down, place the print face down over the window, and fix it to the back of the mount with acid-free tape along the top edge only, so the paper can hang flat and move with the seasons. Then put the glass, mount and backing board back in the frame.
Want the frame too? Every picture frame can be ordered with a mount cut to your print, and our picture mounts page lists every standard size. To choose the frame size for a print, see our picture frame sizes chart.